檢視陈文炯的原始碼

[[File:应1447.jpg|缩略图|[http://faculty.dlut.edu.cn/wjchen/zh_CN/index.htm 原图链接]]]
'''陈文炯''',男，[[大连理工大学]][[博士]]、副教授、硕士生导师。
<ref>[http://faculty.dlut.edu.cn/wjchen/zh_CN/index.htm 大连理工大学] </ref> 

==工作经历==

2016.1 – 至今，大连理工大学船舶工程学院，讲师

==教育经历==

2015.4 – 2015.12，School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney（悉尼大学航空航
天、机械与机电工程学院），博士后

2014.2 – 2016.1，大连理工大学船舶工程学院，博士后

2008.9 – 2014.1，大连理工大学工程力学系，直读博士

2004.9 – 2008.7，大连理工大学工程力学系，本科

==发表论文==

1.Chen Wenjiong, Tian Xiangyu, Gao Renjing, Liu Shutian*. A low porosity perforated mechanical metamaterial with 
negative Poisson’s ratio and band gaps. Smart Materials and Structures, 2018, 27: 115010. （SCI/EI）

2.Chen Wenjiong, Tong Liyong, Liu Shutian. Design of periodic unit cell in cellular materials with extreme properties 
using topology optimization. Journal of Materials: Design and Applications, 2018, 232: 852-869. （SCI/EI）

3.Chen Wenjiong, Zheng Xiaonan, Liu Shutian*. Finite-element-mesh based method for modeling and optimization of lattice 
structures for additive manufacturing. Materials, 2018, 11(11): 2073（SC/EI）

4.Chen Wenjiong, Tong Liyong, Liu Shutian*. Concurrent topology design of structure and material using a two-scale 
topology optimization. Computers & Structures, 2017, 178 :119-128. （SCI/EI）

5.Chen Wenjiong, Liu Shutian*. Microstructural topology optimization of viscoelastic materials for maximum modal loss 
factor of macrostructures. Structural and Multidisciplinary Optimization, 2016, 53:1-14. （SCI/EI）

6.Chen Wenjiong, Liu Shutian *, Tong Liyong, Li Sheng. Design of multi-layered porous fibrous metals for optimal sound 
absorption in the low frequency range. Theoretical and Applied Mechanics Letters, 2016, 6(1): 42-48.

7.Chen W, Liu S. Topology optimization of microstructures of viscoelastic damping materials for a prescribed shear 
modulus[J]. Structural and Multidisciplinary Optimization, 2014, 50(2): 287-296.（SC/EI）

8.Li Quhao, Chen Wenjiong, Liu Shutian *，Jiaxing Wang. A novel implementation of asymptotic homogenization for 
viscoelastic composites with periodic microstructures. Composite Structures, 2019, 208: 276-286. （SC/EI）

9.Liu S, Chen W, Zhang Y. Design optimization of porous fibrous material for maximizing absorption of sounds under set 
frequency bands[J]. Applied Acoustics, 2014, 76: 319-328.（SCI/EI）

10.Li Quhao, Chen Wenjiong, Liu Shutian*, Fan Huiru. Topology optimization design of cast parts based on virtual 
temperature method. Computer-Aided Design, 2018, 94: 28-40. （SCI/EI）

11.Li Quhao，Chen Wenjiong, Liu Shutian*, Tong Liyong. Structural topology optimization considering connectivity 
constraint. Structural and Multidisciplinary Optimization, 2016, 54: 971-984.（SCI/EI）

12.Rui Hu, Wenjiong Chen, Quhao Li; Shutian Liu*. Design optimization method for additive manufacturing of the primary 
mirror of a large-aperture space telescope. Journal of Aerospace Engineering, 2017, 30(3): 04016093. （SCI/EI）

13.Liu Shutian*, Li,Quhao， Chen Wenjiong, Tong Liyong. H-DGTP—a Heaviside-function based directional growth topology 
parameterization for design optimization of stiffener layout and height of thin-walled structures. Structural and 
Multidisciplinary Optimization,2015, 52:903-913. （SCI5/EI）

14.Liu Shutian *, Quhao Li, Chen Wenjiong, Cheng Gengdong. An identification method for enclosed voids restriction in 
manufacturability design for additive manufacturing structures. Frontiers of Mechanical Engineering,2015, 10 (2):126-
137

15.Liu Shutian*, Li Quhao, Liu Junhuan, Chen Wenjiong*, Zhang Yongcun. A realization method for transforming a topology 
optimization design into additive manufacturing structures. Engineering, 2018, 4(2): 277-285. （SCI/EI）

16.陈文炯，刘书田，张永存.基于拓扑优化的自发热体冷却用植入式导热路径设计方法.力学学报, 2016,48 (2):406-412

17.高仁璟，张莹，赵剑，陈文炯*，刘书田， 仝立勇.面向结构形状控制的压电纤维复合薄膜驱动器布局方式与控制参数协同优化设计.
机械工程学报, 18 :177-183

18.白伟, 李取浩, 陈文炯, 刘书田. 基于映射的拓扑优化最大尺寸控制方法. 工程力学, 2017, 34(9): 18-26. （EI）

19.张南, 张永存, 陈文炯, 吴书豪, 刘书田. 含流道微桁架夹层面板隔热性能评估方法. 复合材料学报, 2017, 34(4): 850-858(EI)

20.刘书田，李取浩，陈文炯，张永存. 拓扑优化与增材制造结合: 一种设计与制造一体化方法. 航空制造技术, 2017, 529(10): 26-
31.  

==研究方向==

面向增材制造的结构优化设计方法

粘弹性阻尼材料微结构设计与阻尼机理研究

纤维型吸声材料性能分析与优化设计研究

结构减振降噪数值分析方法研究 

==参考资料== 
{{Reflist}}

[[Category:教师]]