陳文炯檢視原始碼討論檢視歷史
工作經歷
2016.1 – 至今，大連理工大學船舶工程學院，講師
教育經歷
2015.4 – 2015.12，School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney（悉尼大學航空航 天、機械與機電工程學院），博士後
2014.2 – 2016.1，大連理工大學船舶工程學院，博士後
2008.9 – 2014.1，大連理工大學工程力學系，直讀博士
2004.9 – 2008.7，大連理工大學工程力學系，本科
發表論文
1.Chen Wenjiong, Tian Xiangyu, Gao Renjing, Liu Shutian*. A low porosity perforated mechanical metamaterial with negative Poisson’s ratio and band gaps. Smart Materials and Structures, 2018, 27: 115010. （SCI/EI）
2.Chen Wenjiong, Tong Liyong, Liu Shutian. Design of periodic unit cell in cellular materials with extreme properties using topology optimization. Journal of Materials: Design and Applications, 2018, 232: 852-869. （SCI/EI）
3.Chen Wenjiong, Zheng Xiaonan, Liu Shutian*. Finite-element-mesh based method for modeling and optimization of lattice structures for additive manufacturing. Materials, 2018, 11(11): 2073（SC/EI）
4.Chen Wenjiong, Tong Liyong, Liu Shutian*. Concurrent topology design of structure and material using a two-scale topology optimization. Computers & Structures, 2017, 178 :119-128. （SCI/EI）
5.Chen Wenjiong, Liu Shutian*. Microstructural topology optimization of viscoelastic materials for maximum modal loss factor of macrostructures. Structural and Multidisciplinary Optimization, 2016, 53:1-14. （SCI/EI）
6.Chen Wenjiong, Liu Shutian *, Tong Liyong, Li Sheng. Design of multi-layered porous fibrous metals for optimal sound absorption in the low frequency range. Theoretical and Applied Mechanics Letters, 2016, 6(1): 42-48.
7.Chen W, Liu S. Topology optimization of microstructures of viscoelastic damping materials for a prescribed shear modulus[J]. Structural and Multidisciplinary Optimization, 2014, 50(2): 287-296.（SC/EI）
8.Li Quhao, Chen Wenjiong, Liu Shutian *，Jiaxing Wang. A novel implementation of asymptotic homogenization for viscoelastic composites with periodic microstructures. Composite Structures, 2019, 208: 276-286. （SC/EI）
9.Liu S, Chen W, Zhang Y. Design optimization of porous fibrous material for maximizing absorption of sounds under set frequency bands[J]. Applied Acoustics, 2014, 76: 319-328.（SCI/EI）
10.Li Quhao, Chen Wenjiong, Liu Shutian*, Fan Huiru. Topology optimization design of cast parts based on virtual temperature method. Computer-Aided Design, 2018, 94: 28-40. （SCI/EI）
11.Li Quhao，Chen Wenjiong, Liu Shutian*, Tong Liyong. Structural topology optimization considering connectivity constraint. Structural and Multidisciplinary Optimization, 2016, 54: 971-984.（SCI/EI）
12.Rui Hu, Wenjiong Chen, Quhao Li; Shutian Liu*. Design optimization method for additive manufacturing of the primary mirror of a large-aperture space telescope. Journal of Aerospace Engineering, 2017, 30(3): 04016093. （SCI/EI）
13.Liu Shutian*, Li,Quhao， Chen Wenjiong, Tong Liyong. H-DGTP—a Heaviside-function based directional growth topology parameterization for design optimization of stiffener layout and height of thin-walled structures. Structural and Multidisciplinary Optimization,2015, 52:903-913. （SCI5/EI）
14.Liu Shutian *, Quhao Li, Chen Wenjiong, Cheng Gengdong. An identification method for enclosed voids restriction in manufacturability design for additive manufacturing structures. Frontiers of Mechanical Engineering,2015, 10 (2):126- 137
15.Liu Shutian*, Li Quhao, Liu Junhuan, Chen Wenjiong*, Zhang Yongcun. A realization method for transforming a topology optimization design into additive manufacturing structures. Engineering, 2018, 4(2): 277-285. （SCI/EI）
16.陳文炯，劉書田，張永存.基於拓撲優化的自發熱體冷卻用植入式導熱路徑設計方法.力學學報, 2016,48 (2):406-412
17.高仁璟，張瑩，趙劍，陳文炯*，劉書田， 仝立勇.面向結構形狀控制的壓電纖維複合薄膜驅動器布局方式與控制參數協同優化設計. 機械工程學報, 18 :177-183
18.白偉, 李取浩, 陳文炯, 劉書田. 基於映射的拓撲優化最大尺寸控制方法. 工程力學, 2017, 34(9): 18-26. （EI）
19.張南, 張永存, 陳文炯, 吳書豪, 劉書田. 含流道微桁架夾層面板隔熱性能評估方法. 複合材料學報, 2017, 34(4): 850-858(EI)
20.劉書田，李取浩，陳文炯，張永存. 拓撲優化與增材製造結合: 一種設計與製造一體化方法. 航空製造技術, 2017, 529(10): 26- 31.
研究方向
面向增材製造的結構優化設計方法
粘彈性阻尼材料微結構設計與阻尼機理研究
纖維型吸聲材料性能分析與優化設計研究
結構減振降噪數值分析方法研究